Impelling Tools

Master impelling tools! Identify hammers, mallets, and more. Learn safe usage.

Question 1What is the name of the hand tool shown below? Rubber Mallet Claw Hammer Mallet Sledge Hammer Question 2What is the name of the hand tool shown below? Rubber Mallet Claw Hammer Mallet Sledge Hammer Question 3While pulling out a nail as shown below, using a waste wood underneath the claw hammer head prevents dents on the wood surface. What is another purpose of the waste wood? To look professional. To increase the effort required to pull the nail out. To extend the lifetime of the claw hammer. To reduce the effort required to pull the nail out. Question 4 - Safety Precautions for HammersFill in the blanks. Always wear eye protection when hammering and pulling out nails. Ensure that the face of the hammer is not chipped or damaged and is free from dirt, paint or grease. Check the handle for splits and ensure that the head is firmly attached to the handle. Do not use hammers with loose heads or chipped faces. Never strike with the side of the hammer. Never strike the face of one hammer with another. Question 5What can a sledge hammer be used for? For driving pegs into the ground. For making boats. For driving small panel pins into wood. For making furniture. Question 6Which of the following is the best tool for striking a chisel while making wood joints? Sledge Hammer Mallet Warrington Hammer Claw Hammer Question 7What is a nail punch used for? For making small dents in wood. For driving the nail head just below the surface of the timber. For pulling out bent nails. For punching screws into the wood. Question 8Which of the following can not be used to drill a hole in wood? Hand Drill Cordless Drill Jig Saw Electric Drill Question 9Match the hand tools with their correct use. A screw driver For driving and withdrawing screws. Rubber Headed Mallet For assembling furniture carcase. Pinch Bar For pulling out large nails. Pincers For pulling out small bent nails. Question 10Which of the following diagram shows the correct way of holding a claw hammer?